52 mm X 75 mm X 10 mm TCM Oil Seal NBR TC



2.047" ID X 2.953" OD X 0.394" HT TCM Oil Seal NBR TC





-40°F to 212°F (-40°C to 100°C)


Dual Lip W/ Garter Spring


Rubber Coated

Need an oil seal that isn't listed?

  • Custom orders are available and can be shipped as soon as two business days!
  • Minimum quantity and pricing for custom orders vary based on the size(s) and dimension(s) ordered.
  • Shipping is calculated after we receive the request.
  • Send us a message with the size and shape you need.
  • If you need it fast let us know and we will work on getting it to you as soon as possible, extra shipping charges may apply.

What is an Oil Seal?

  • A specific type of seal that is an important part of any rotating or moving part assembly. 
  • Typically, the Oil Seal is installed adjacent to a bearing
    • This seals in or seals out, as necessary, the various liquids, gases or solids encountered by the mechanism.

 What is the purpose of an Oil Seal?

  • An Oil Seal is designed to perform three major functions. 
    • Prevention of lubricants from leaking outside the seal
    • To act as a barrier to retain the lubricating oil
    • To prevent dirt and other contaminants from entering the machinery.

 How is an Oil Seal constructed?

  • Oil seals normally consist of three basic components:
    • the sealing element
    • the metal case
    • the garter spring.
  • The sealing element makes up the interior of the Oil Seal and provides structural stability to the Oil Seal. 
  • The materials commonly used are: 
    • Nitrile Rubber (NBR)
    • Polyacrylate Rubber (PA)
    • Silicone Rubber (SI)
    • Fluorocarbon Rubber (FKM).
  • The metal case is the exterior of the Oil Seal. 
    • The main function of the metal case is to give rigidity and strength to the seal.
    • Often the case is covered by the same rubber material used in the sealing element, which also helps seal the exterior of the Oil Seal in the housing bore.
    • Common case material types are:
      •  Carbon Steel
      • Stainless Steel.
  • The garter spring is located at the end of the primary sealing lip
  • Is used to apply pressure to the sealing lip against the shaft as well as prevent the entry of contaminants from the outside. 
    • Common garter spring material types are:
      • Carbon Steel
      • Stainless Steel. 

NBR Oil Seals

Nitrile - (NBR/BUNA)

  • NBR is a synthetic rubber produced from a copolymer of acrylonitrile and butadiene. 
  • NBR is the recommended seal material for most common applications.  
  • NBR seals are compatible with water and most common mineral oils and greases. 
  • They have good abrasion resistance, resistance to compression set, and a high tensile strength

Payment & Security

American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

Recommended For You

Recently viewed